PJ Link Troubleshooting

Modified on Thu, 7 Apr, 2022 at 11:44 AM

For PJLINK to function the following needs to be true:

1. the I.P address of the projector needs to be static

2. the projector and iPad need to be on the same network

3. Power save is turned off on the projector

4. the projector password is correct

5. the projector is on the latest firmware (found within the projector menu settings)

6. the Virtual App can find devices on your network. This is within iPad Settings > Privacy > Local Network > toggle Les Mills Virtual to ON

 

After downloading the Les Mills Virtual App, one will likely see the pop up message below: Please allow access by clicking OK

Graphical user interface, application

Description automatically generated

 

If access is not allowed, you can go to iPad Settings > Privacy > Local Network > toggle Les Mills Virtual to ON

Graphical user interface, application, Teams

Description automatically generatedGraphical user interface, application, Teams

Description automatically generated

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article